Davey Submersible Dewatering Pumps

Davey Submersible Dewatering Pumps

Dewatering submersible pumps with a choice of single or three phase models.


Available in-store only


$ 0.00

SKU: Davey Submersible Dewatering Pumps. Categories: , , .

Davey Submersible Dewatering Pumps

Davey submersible dewatering pumps are available with a choice of single or three phase models. Suitable fluids are clean or “grey water” of neutral pH containing up to 10% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension.


  • Sump Emptying
  • Septic Water Disposal
  • Water Transfer
  • Pumping of neutral, non-aggressive factory waste water.


  • Open impeller, centrifugal design is able to pump small soft solids in suspension and less susceptible to blockage.
  • Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side.
  • Sand slinger lip seal for added protection and long service life.
  • Corrosive resistant 304 stainless steel motor shell and strainer.
  • HO7RNF oil resistant leads with bare wire lead ends for easy connection to power supply terminations.
  • High quality paint finish, attractive lasting appearance.
  • Automatic resetting thermal overload.
  • Low velocity inlet strainer fitted for firm and stable positioning during installation and operation. Also restricts pumping of solids which may damage or block the pump.

Model numbers: D75A, D75M, D150, DT08, DT15, DT22 & DT37

Download Davey Submersible Dewatering Pump Brochure Here